Xiamen Sinolook Oil Co., Ltd

★ High-Base · Maximum TBN

High-TBN Calcium Sulfonate

High-TBN calcium sulfonate — maximum acid-neutralizing reserve and detergency for heavy-duty and marine engine oils. The high-base grade for high-sulphur fuel and long drain intervals.

High TBN
Max Base Reserve
Ca
Calcium-Based
HDDO + Marine
High-Sulphur Fuel
60+
Countries Served
Product Overview

Maximum TBN reserve for the toughest acid loads

High-TBN calcium sulfonate carries a large reserve of colloidal calcium carbonate, delivering maximum acid-neutralizing capacity for the most demanding engine and marine oils.

When an oil must neutralize strong acids over long drain intervals or on high-sulphur fuel, high-TBN calcium sulfonate provides the maximum base reserve per unit of additive. It is a core detergent for heavy-duty diesel engine oils and marine engine oils, where TBN demand is highest, and it delivers strong detergency to keep pistons clean under hard service. It is typically used with phenate and salicylate detergents to balance TBN, cleanliness and sulphated ash. It belongs to the sulfonate detergent family; for very high TBN marine applications it is often paired with overbased grades.

High TBN calcium sulfonate detergent additive
Typical Specification

High-TBN Calcium Sulfonate — typical properties

Representative typical values for high-TBN calcium sulfonate. Indicative only — exact values vary by grade and are confirmed on the TDS and batch COA.

PropertyTypical ValueMethod / Note
AppearanceBrown viscous liquidVisual
Total Base Number (TBN)~300–400 mg KOH/gASTM D2896 · high-base
Calcium content~12–15 wt%Grade-dependent
Kinematic viscosity (100°C)~100–500 mm²/sASTM D445
Flash point (COC)> ~170 °CASTM D92
Density (15°C)~1.1–1.25 g/cm³Typical
Sulphated ashHighASTM D874

Typical values for guidance only — not a specification. Request the TDS for the specific grade you need; the COA reports actual measured values for your batch.

Applications

Where high-TBN calcium sulfonate is used

Heavy-Duty Diesel Oils

Core TBN source for HDDO neutralizing combustion acids over long drains. See diesel engine oil additives.

Marine Engine Oils

High-TBN reserve for marine trunk-piston and cylinder oils on high-sulphur fuel. See industrial & marine additives.

Passenger Car Oils

Detergency and TBN where higher base reserve is required.

Industrial Engine Oils

Acid control and cleanliness in gas and stationary engine oils.

Key Advantages

Why formulators choose high-TBN calcium sulfonate

1

Maximum TBN reserve

Highest acid-neutralizing capacity in the calcium sulfonate range — reach target TBN with less additive.

2

Strong detergency

Keeps pistons and ring grooves clean under the hardest engine service conditions.

3

High-sulphur fuel ready

The detergent of choice where fuel sulphur and long drains drive high TBN demand.

Packaging & Supply

From sample drum to ISO tank

Sinolook supplies high-TBN calcium sulfonate at any scale, from formulation samples to commercial bulk, to over 60 countries.

200 L DrumSample / qualification
1000 L IBCPilot batches
Flexitank~20 MT
ISO TankCommercial bulk
FAQ

Frequently asked questions

What is high-TBN calcium sulfonate used for?
High-TBN calcium sulfonate is a high-base detergent used where an oil must neutralize strong acids over long service — mainly heavy-duty diesel engine oils and marine engine oils, especially on high-sulphur fuels. It provides maximum acid-neutralizing reserve (TBN) plus strong detergency to keep engines clean. It is typically blended with phenate and salicylate detergents to balance TBN and sulphated ash.
What TBN does high-TBN calcium sulfonate provide?
High-TBN calcium sulfonate typically provides a TBN in the region of 300 to 400 mg KOH/g, with overbased grades reaching higher. This is the upper end of the calcium sulfonate range, giving maximum acid-neutralizing reserve per unit of additive. Exact TBN is confirmed on the TDS and batch COA.
Why do diesel and marine oils need high-TBN detergent?
Diesel and marine engines burn higher-sulphur fuels that produce strong acids in the oil. High-TBN detergent supplies the base reserve to neutralize those acids over long drain intervals, protecting bearings and cylinder surfaces from corrosive wear. The higher the fuel sulphur and the longer the drain, the higher the TBN demand — which is why high-TBN calcium sulfonate is essential for these oils.
What is the difference between high-TBN and overbased calcium sulfonate?
High-TBN and overbased calcium sulfonate are closely related — both carry an excess base reserve for acid neutralization. “Overbased” describes the manufacturing route (carrying colloidal calcium carbonate), and the most overbased grades reach the highest TBN (up to ~500). High-TBN is a practical grade descriptor for the high-base end of the range. For maximum reserve, see overbased calcium sulfonate.
Can Sinolook provide TDS, MSDS and COA?
Yes. TDS, MSDS (GHS-format SDS) and a batch-specific COA are provided for every grade in English or Chinese. Sinolook supplies high-TBN calcium sulfonate in drum, IBC, flexitank and ISO tank quantities to over 60 countries. Email sales@sinolook.com or message us on WhatsApp.

Request high-TBN calcium sulfonate from Sinolook

Tell us your target grade, application and volume — we'll send the TDS, a batch COA and a delivered quotation within 24 hours.

Request a Quote
滚动至顶部